Name: Brain2 HD+Bluetooth flybarless unit
Brand: MSH51632
SKU: MSH51632
Availability: OutOfStock

Description

BRAIN2 HD +BT SPECIFICATIONS:

Size (width x length x height):

29,6 x 37,7 x 22,3 mm

Weight:

20,2 g

15 Connections:

9 Gold-plated servo type three pole JR/Futaba male connectors, with 11 signals connections configurable for:

9 output (7 PWM + TX for BT + TX for on onboard USB), and/or 11 input (6 single PWM from RX, 1 RPM pulses + SAT1 +SAT2 + RX for BT + RX on onboard USB) and 8 servo power bus connections

1 Power MPX connector controlled by a switch

1 Gold-plated servo type three pole male JR/Futaba connector for power switch
1 On board micro USB connector capable to power internally the Unit

1 Wireless connection (Bluetooth)
2 SAT three pole JST connectors with 3,3V output (2 input and/or 2 output)

Serial input for every receiver Brand with very low latency method:

Spektrum: New bidirectional SRXL v2 (with telemetry) / Bidirectional SRXL (with telemetry) / Unidirectional SRXL / DSM2 22mS / DSM2 11mS / DSMX 11mS / PPM / Remote RX
Futaba: S.Bus2 (with telemetry) / S.Bus / PPM
Jeti: EX-BUS (with telemetry) / UDI / PPM+ / PPM-
Graupner: SUMD (with telemetry) / SUMO
Multiplex: SRXL-12 / SRXL-16 + MSB (with telemetry)
FrSky: S.Bus + Smart.Port (with telemetry) / F.Port (with telemetry) / F.Port2 (with telemetry) / F.Bus (with telemetry) / S.Bus
JR: X-Bus A (with telemetry) / X-Bus B / DMSS

Hitec: S.Bus

RadioLink: S.Bus

TBS: Crossfire (with telemetry) / S.Bus / PPM

ELRS: Crossfire (with telemetry)

FlySky: i-Bus (with telemetry)
PowerBox P2Bus (with telemetry) / SRXL-16

Governor:

For Electric, Nitro, Gasser
Governor rotor speed control range: 800-6500 RPM

Autorotation Bailout function (fast RPM recovery from a failed autorotation manoeuvre)

Telemetry input:

From ESC on electric models:

Castle Creation
Hobbywing V3/V4/V5

Align
Scorpion
Kontronik
YGE

Spektrum

FrSky
OMP
ZTW

ZDFly

Graupner

From Temperature sensors on Nitro / Gasser / Turbine models:

Jeti
Futaba

From RPM Sensors:

All sensor brand

Possibility to monitor separately also the RPM of the tail motor

From Variometer (Altitude, Vertical Speed):

Jeti on SAT2 connector
FrSky, Futaba, Robbe, Graupner sensors on Bus

Quality Of Signal (QOS) received:

For all receivers brand

Quality of Servo Voltage input:

For all kind of Power input: ESC BEC, external/separate BEC, 2S Lipos/Li-Ion/Li-Fe/NiCd/NiMh, Backup Power Systems

Telemetry output:

Spektrum, Futaba, Jeti, Graupner, Multiplex, OpenTX, EdgeTX, Ethos, Crossfire, JR, PowerBoxSystem, FlySky

Power input:

Between 4,5V to 15V with one or two (redundant) lines from BEC or 2S Li-Po (7.4V) or 2S Li-Ion (7.4V) or 2S Li-Fe (6.6V) or 5/6/7 NiCd -NiMh

The direct current managed by the electronic switch located downstream of the MPX connector is 20A with short-term peaks up to 50A

Outputs:

7 Servos/ESC outputs. Of which 5 are fully programmable from 50 to 560Hz (also for cyclic control)

Auto Diagnosis at each power on:

With result by LED flashes

With result by initial Swashplate movements

Diagnostic logs:

More than 50 different parameters can be recorded during flights

Vibrations are also logged during flights

More than 50 different types of Events are monitored and automatically logged during flights

Already included “on board”:

Status LED

Bluetooth

USB on board

Parameters setup / regulation:

Via apps in English, Deutsch, Francois, Russian, Chinese, Italian, Spanish (with the possibility to add, edit, share other languages):

Windows

MAC (with emulators)

Linux (with emulators)

Android

iOS

Via “Integrations” menu:

Spektrum

Jeti

Graupner

OpenTX

EdgeTX

Ethos

Crossfire (ELRS/TBS)

Via dedicated transmitters channels (dials):

In addition to the radio channel dedicated to tail gain, up to other three radio channels can be assigned to one of the 51 internal parameters of the unit

Bluetooth compatibility:

Windows:
XP (32 & 64bit)
7 (32 & 64bit)
VISTA (32 & 64bit)
8 (32 & 64bit)
8.1 (32 & 64bit)
10 (32 & 64bit)
11 (64bit)
Android:
from Android version 4.0.3 or higher
Apple:
from iOS version 8.0 or higher

Swashplates:

90°

120°

135°

140°

4 servos
Tandem rotors

Mounting positions:

Up to 16 different possible mounting positions on the model

Included in the package:

1x Brain2 HD+Bluetooth

1x Servo cable for serial RX connection

1x Cable red/black + plug MPX

1x Switch black + cable + plug

2x Double-sided adhesive

1x ‘Safety Notes’ leaflet

Please, after purchase, download for free the latest software from “Downloads“.
Updates can be handled for free automatically by the software after first installation.

Visit Release Notes under “HELP” menu of the BRAIN Software after each update.