Requests / Suggestions - MSH-Electronics Forum

KISS ESC Telemetry support for Brain 2

kraken192 — Sat, 20 Dec 2025 18:37:37 +0000

Hello,
I would like to request the addition of KISS ESC Telemetry support for the Brain 2.

Many of us are starting to use KISS ESCs in our helicopter setups, and it would be amazing to have full telemetry integration (Amps, Volts, mAh consumed, etc.) just like we have with Hobbywing or Scorpion ESCs.

Is this something that could be added to the development roadmap?

Thanks for considering!

Brain Lua Script not working on Radiomaster TX15

lukasrotty12 — Sun, 14 Dec 2025 22:18:36 +0000

Hi there,

i recently got a Radiomaster TX15 with EdgeTX.

When i start the Lua script it is completely black screen. You see the values in white but cannot make out what setting you are changing.

Is there an update planned for radiomaster tx15?

Cheers

General Instructions - Tab 1

okcrcpilot — Tue, 05 Aug 2025 13:51:58 +0000

Under Model type, please add Align TREX 650 Electric. Thank you.

Add details of loaded files on the diagrostic sections.

PaoloFCantoni — Thu, 29 May 2025 05:13:55 +0000

As you know, I do a LOT of file comparisons! I load and unload all three types of files regularly. It would be most helpful to indicate the loaded file at the top of the relevant tabs (and to remain there when the data can scroll). This would be true for the Configuration, Flight Log, and Events files.

Ability to change playback speed on Vibratons Tab (Diagnostic section)

PaoloFCantoni — Thu, 29 May 2025 04:48:40 +0000

The ability to observe vibrations from downloaded logging and from saved files is excellent! But, sometimes the speed of the playback is faster than I can analyse (I'm getting older ;) ). Would it be possible to add a mechanism to change the playback speed for playback other than real-time playback of the vibration data?

Add Helicopter Name to Wizard Page 1

PaoloFCantoni — Thu, 29 May 2025 04:43:55 +0000

I have at least 4 helicopters with Brain2 BTs, and I hope to have more. Would it be possible to include the ability to name the Helicopter on Page 1 of the Wizard so that I can make sure I don't confuse matters? Could that also be stored in the saved files? As you may know, I perform numerous file comparisons, and it would be beneficial to ensure I am reviewing the correct file and settings (when live).

Command line COM port selector

PaoloFCantoni — Mon, 28 Apr 2025 12:31:05 +0000

In a five-year-old post, I asked about being able to enter the configurator directly in Demo mode from the command line (since Port Scanning was taking so long). BrainDev kindly explained how Bluetooth connectivity works under Windows. (See https://www.helifreak.com/showthread.php?t=855867&highlight=Command+line#post8004903)

Eventually, this functionality was added, and we can now enter Demo mode directly from the command line (using the -demomode switch).

I'm getting back into the hobby after a three-year gap. I've got four Brain2 BT units that I am constantly swapping between as I try to get these helis flyable again. The Bluetooth scanning time is considerable, especially as we now have more and more Bluetooth devices connected to our devices these days. I'm requesting to see if we can add a command line parameter to determine which COM port the configurator should attempt to connect to. Something like -COMn where n idetifies the port nuber to be used.

Thoughts?
Paolo

Brain2 Configurator Wizard "General Instructions" Statement

PaoloFCantoni — Tue, 25 Mar 2025 03:58:04 +0000

On the Wizard "General Instructions" page of the configurator is the statement:
"These selections modify the Brain parameters on a new unit or if they are selected immediately after a factory reset before any other setup is done"

I can see how this will work when making manual changes. Does this also apply to a Configuration file load after a factory reset? That is, will the parameters be modified in the same way on load?

Let's say I have a couple of parameters wrong on the Wizard page, and BrainDev has suggested I fix them. As I read the statement, if I want to retain the other settings on the other pages, the file I load must already have the corrected parameter values in place; I can't change them afterwards and have them take any effect. Is that correct? Indeed, do the "General Instructions" values have any effect on the settings when loaded from a file or does the configurator assume they have previously been made when originally manually set?

TIA,
Paolo

Is this Event Log correct?

PaoloFCantoni — Thu, 20 Mar 2025 02:56:15 +0000

As noted elsewhere on HeliFreak, I have recently returned to the hobby after a few years of hiatus (since early 2022). I have been having problems with the Event Logs after upgrading the Brain2 BTs to firmware v3.4.201.
The attached files are from the last of my four helis—a Protos 700 v2. This Brain2 BT unit is different from the others in that the micro USB connection is defective, and the unit can only be communicated with via Bluetooth (I haven't bought a Remote USB 2 interface—although if recommended, I would consider it).

Anyway, the reason for this support request is that Since this is the last of my four helis and I have just upgraded it, it is the cleanest in terms of Event Logs and Recorded Logs. There is only one.
As with the other Helis, the blades were removed to allow a bench test. Then the process used was:
1) Power up Heli and connect to Brain2 via Bluetooth using Configurator v3.4.206. The unit was identified as having old firmware.
2) The unit has undergone the upgrade and passed all checks. It is now running firmware v3.4.201. Erase Logs as recommended in the update. Save the Configuration file (attached). Power down, Heli.
3) Power up the Heli, connect the transmitter (but not the configurator) and check that the servos move correctly.
4) Spin up the Heli to allow a rudimentary check for unbladed vibrations. Power down Heli.
5) Power up the Heli, connect the configurator, download the Event Log and save it to the file (attached). Download the "flight" log and save it to the file (attached).

Power down Heli.

This support request is based on the fact that while the Flight log appears to have captured the bench test, I cannot relate what happened on the test to what the log is saying with the event log. The "flight" (#1) lasted just over a minute, and Log N is set to 1 for lines 3 to 25. Log 1 terminates at Events time = 64 (64 seconds—which correlates with the "flight" log). What appears to be missing is the events relating to the startup, similar to:
6;;1;PowerOn
6;;2;Coldstart
6;;3;All of the Self Tests passed successfully
6;;51;Setup 1 loaded
6;1;6;Logs Recording Started
prior to line 3.
Can you please confirm that the Event log and the flight log are for the same flight and whether the Event log contains the events correctly? If not, what should a correct, valid Event log look like for Flight 1? I have also attached the last event log from 2021, which is when I last saved it before I stopped flying the heli.

1424 1422 1423

Additional Item For Counter Drop-down List

Acrow — Fri, 31 Jan 2025 06:28:23 +0000

Hello,

Thanks for the ongoing improvements to the Brain/Ikon applications.

Thanks for the opportunity to make suggestions.

I would like to request that an additional item be added to the drop-down list for the optional counters. I would like to have the option to select "One way bearing".

It would also be good if we had the ability to set a value. Eg If I had flown with a new item for five hours before checking the counters, it would be good if the user could enter the current value for that item. At present the only option is to reset it to 0.

I would also like to see the drop down list sorted alphabetically.

Kind regards.