Our Flight Control Units can be used with all transmitters and receivers on the market.
If in the future new brands and models of radios currently not compatible will be released, they will become compatible through a simple firmware update of our control units.
We have deliberately chosen not to make Flight Control Units with built-in receivers so that our Flight Control Units can be used with your current brand of radio but also with the radio that you will decide to use in the future if you want to change model or brand of radio.
Also, since the receivers are not integrated in the control unit, you can mount the Flight Control Unit in one location and the receiver in another location away from sources of interference such as batteries, motors, ESCs and servos for less noise transmitted to the receiver antennas and better RF signal reception.
For each of the current radio systems we have developed specific routines that fully exploit their features and potential.
For any brand or model of transmitter and receiver that has telemetry you can take advantage of telemetry at no additional cost.
You can modify the Flight Control Unit setups in flight using switches, trims, dials and/or potentiometers on your transmitter.
Even with radios without telemetry you can be alerted by our Flight Control Units when the battery is low and it is time to land.
With the most popular brands of radios, you will have menus available on your transmitter screens where you can change the configuration and setup of your Flight Control Unit.
With our Flight Control Units you will not have to buy a new, different and dedicated transmitter to take full advantage of the potential of our Flight Control Units. You can use your current transmitters.
In the purchase price of our Flight Control Units are already included and active all the features and you will not have to pay anything more to activate some features.